概括
汇集GEPRC团队各方面的经验与进化 .CineLog35 V2终于以更优异的性能推向市场。
CineLog35 v2版本集成O3 VTX。CineLog35 V2版本的主碳板和注塑保护架增加了7075铝柱进行结构加强。
电池安装方式采用扎带固定 .7075铝件固定。电源XT60E1-M插头与碳板集成在一起 .方便使用。O3 Air Unit的保护框架增加了存储卡和USB端口 .方便读取数据。
配备 F722-45A AIO 和新型 SPEEDX2 2105.5 电机 .动力更强劲 .动力系统强劲 .响应更快。
这是一款3.5寸高清FPV电影级FPV无人机 .集电影感、自由式、休闲性、安全性于一体 .满足用户在室内室外各种场景的飞行和拍摄要求 .用户满意的声音是我们前进的动力。
更新日志
2023 年 5 月 8 日：CineLog35 V2 电机从 SPEEDX2 2105.5-2150KV(6S) 更改为 SPEEDX2 2105.5-2650KV(6S)。
2023 年 9 月 4 日：CineLog35 V2 从 GEP-M8U GPS 更改为 GEP-M10 GPS。
CineLog35 V2 的 CLI 转储：https://geprc.com/downloads/cinelog35-v2/
特征
- New appearance design. strengthening carbon plate. hollow design. injection protection frame. noise reduction design. flight safety. silent.
- Adopts the GEP F722-45A AIO V2 high performance flight controller.
- Propeller Guard adds memory card and USB ports to O3 Air Unit for easy data reading
- For O3 camera design independent under hanging shock absorption gimbal. to solve the camera IMU resonance issues. to achieve the optimal anti-shake effect.
- SPEEDX2 2105.5 motor with HQ DT90 propeller. stable power output. and smooth flight feel.
- Power cable using XT60E1-M plug and carbon plate integrated design. convenient application.
- Battery installation method using a tie with 7075 aluminum parts fixed. solid and stable.
- Carefully tuned 3.5-inch HD cinematic FPV with flexible and delicate flight feeling.
Specifications
- Model: Cinelog35 V2 Analog
- Frame: GEP-CL35 V2
- Wheelbase: 142mm
- Gimbal Plate: 2.0mm
- Top Plate: 3.5mm
- Bottom Plate: 1.5mm
- FC system: GEP-F722-45A AIO V2
- MCU: STM32F722RET6
- Gyro: ICM 42688-P
- OSD: Betaflight OSD w/AT7456E chip
- ESC: 8Bit 45A
- VTX: GEPRC RAD 1W(UFL)
- Camera: Caddx Ratel2
- Antenna: GEPRC Peano 5.8 RHCP UFL
- Motor: SPEEDX2 2105.5-2650KV (6S)
- Propeller: HQProp D-T90MM
- GPS: GEP-M10
- CineLog35 V2 Analog TBSNanoRX weight: 263.8g
- Receiver: PNP. GEPRC ELRS2.4G. TBS Nano RX
- Recommended battery: LiPo 1050mah-1300mah
- Flight time: 5′00″ -8′ 30″
Includes
1 x CineLog35 V2 Analog
2 x HQProp D-T90MM（2 pairs）
2x M20*250mm battery strap
2 x Battery Silicone Pads
1 x Set of screws
1 x L-shaped screwdriver (1.5mm)
1 x L-shaped screwdriver (2mm)
1 x L-shaped screwdriver (3mm)
1 x M5 wrench
1 x plastic tweezers
1 x Antenna fixed tube (pair)
1 x Keychain
1 x GP Camera Mounting Base
1 x Naked GP Camera Mounting Base
1 x Antenna Mounting Base
Screw package includes:
2x cup head screws M2*18
2x round head screws with pad M2*5.5
1x round head screws M2*12
2x Rivet nut M2
4x round head screws M2*8
4x round head screws M2*7
4x round head screws M2*6
2x round head screws M2.5*6
2x hexagonal screw M1.6*8
1x Flange nuts M5
2x Press Rivet Nuts_Brass color M2*1.9-OD4.9
2x Iron nut M2
2x Iron nut M2
2x Camera gimbal shock absorbing rubber
Tips: GPS Rescue 4.4 | Betaflight：https://betaflight.com/docs/wiki/archive/GPS-Rescue-v4-4
